△IBS coating
The ion source is used to emit ions, which are extracted, accelerated and focused to form a beam. The ion beam is bombarded into a high vacuum target, and the sputtering atoms are coated. Ion source is the most important part of IBS device. The ion source is usually composed of a network of electrodes that produce ions in the discharge chamber and accelerate (or decelerate) ions to neutralize the ionic charge of the filament. The characteristic of this ion source is that it is equipped with multipole magnetic field and porous ion extraction system, which can easily extract ion beam with large diameter and large current.
Advantage:
High laser damage threshold
Excellent stability
Strong mechanical properties
Disadvantage:
High cost
IBS Products:
UV Mirror,IR Mirror
Window,Thin Film Polarizer
Filter,ect
△IAD Coating
Ion-Beam Assisted Deposition (IAD) uses the same E-beam method to evaporate coating materials but with the addition of an ion source to promote nucleation and growth of materials at lower temperatures (20 - 100 °C). The ion source allows temperature-sensitive substrates to be coated. This process also results in a denser coating that is less sensitive to spectral shifting in both humid and dry environmental conditions.
Advantage:
The membrane has compact structure and good
corrosion resistance
High film rate
Low cost
Disadvantage:
The application of ion plating is limited
The substrate temperature is higher
The deposited films contain more gas
IBS Products:
Mirror,Window,Filter,ect